ASME Standard Spec
ASME Standard Spec Exporter
Contact Us For High Quality ASME Standard Spec
At Kobelco Steel & Alloys we pride ourselves on always putting the customer first. We help make stainless solutions simple for you by ensuring satisfaction through high delivery performance, flexibility and extensive service.
We are pleased to introduce ourselves as one of the leading Importsers, Exporters, Suppliers & Stockists of ASME Standard Spec.
We would appreciate to get your esteemed enquires and look forward to the pleasure receiving your valuable response.
ASTM STANDARD SPECIFICATION
SA1-00 Standard Specification for Carbon Steel Tee Rails
SA2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
SA3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
SA6/A6M-03c Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
SA20/A20M-02 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
SA27/A27M-03 Standard Specification for Steel Castings, Carbon, for General Application
SA29/A29M-03 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
SA31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
SA34/A34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
SA36/A36M-03a Standard Specification for Carbon Structural Steel
SA47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings
SA48/A48M-03 Standard Specification for Gray Iron Castings
SA49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
SA53/A53M-02 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
SA65-01 Standard Specification for Steel Track Spikes
SA66-01 Standard Specification for Steel Screw Spikes
SA67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
SA74-03b Standard Specification for Cast Iron Soil Pipe and Fittings
SA82-02 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
SA90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
SA99-03 Standard Specification for Ferromanganese
SA100-93(2000) Standard Specification for Ferrosilicon
SA101-93(2000) Standard Specification for Ferrochromium
SA102-93(2000) Standard Specification for Ferrovanadium
SA105/A105M-03 Standard Specification for Carbon Steel Forgings for Piping Applications
SA106-02a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
SA108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
SA109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
SA111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
SA116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
SA121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
SA123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
SA125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
SA126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
SA128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
SA131/A131M-01 Standard Specification for Structural Steel for Ships
SA132-89(2000) Standard Specification for Ferromolybdenum
SA134-96(2001) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
SA135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe
SA139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
SA143/A143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
SA144-02 Specification for Ferrotungsten
SA146-64(2000) Standard Specification for Molybdenum Oxide Products
SA148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes
SA153/A153M-03 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
SA159-83(2001) Standard Specification for Automotive Gray Iron Castings
SA167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
SA176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
SA178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
SA179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
SA181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
SA182/A182M-02 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
SA183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
SA184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
SA185-02 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
SA192/A192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
SA193/A193M-03 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
SA194/A194M-03b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
SA197/A197M-00 Standard Specification for Cupola Malleable Iron
SA202/A202M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
SA203/A203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
SA204/A204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
SA209/A209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
SA210/A210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
SA213/A213M-03b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
SA214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
SA216/A216M-93(2003) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
SA217/A217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
SA220/A220M-99 Standard Specification for Pearlitic Malleable Iron
SA225/A225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
SA227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
SA228/A228M-02 Standard Specification for Steel Wire, Music Spring Quality
SA229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
SA230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
SA231/A231M-96(2002) Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
SA232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
SA234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
SA239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
SA240/A240M-03c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
SA247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
SA249/A249M-03a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
SA250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
SA252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
SA254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
SA255-02 Standard Test Method for Determining Hardenability of Steel
SA262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
SA263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
SA264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
SA265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
SA266/A266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
SA268/A268M-03 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA269-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
SA270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
SA275/A275M-98(2003) Standard Test Method for Magnetic Particle Examination of Steel Forgings
SA276-03 Standard Specification for Stainless Steel Bars and Shapes
SA278/A278M-01 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
SA283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
SA285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
SA288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
SA289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
SA290-02 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
SA291-03 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
SA295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel
SA297/A297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
SA299/A299M-03e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
SA302/A302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
SA304-02 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
SA307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
SA308/A308M-03 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
SA309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
SA311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
SA312/A312M-03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
SA313/A313M-03 Standard Specification for Stainless Steel Spring Wire
SA314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging
SA319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
SA320/A320M-03 Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
SA321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered
SA322-91(2001) Standard Specification for Steel Bars, Alloy, Standard Grades
SA323-93(2000) Standard Specification for Ferroboron
SA324-73(2000) Standard Specification for Ferrotitanium
SA325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
SA325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
SA327-91(1997) Standard Test Methods for Impact Testing of Cast Irons
SA327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)
SA328/A328M-03 Standard Specification for Steel Sheet Piling
SA331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
SA333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
SA334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
SA335/A335M-03 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
SA336/A336M-03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
SA338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
SA340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
SA341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
SA342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
SA343/A343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
SA345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
SA348/A348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
SA350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
SA351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
SA352/A352M-03 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
SA353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
SA354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
SA355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding
SA356/A356M-98(2003) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
SA358/A358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
SA363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
SA367-60(1999) Standard Test Methods of Chill Testing of Cast Iron
SA368-95a(2000) Standard Specification for Stainless Steel Wire Strand
SA369/A369M-02 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
SA370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
SA372/A372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
SA376/A376M-02a Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
SA377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
SA380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
SA381-96(2001) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
SA384/A384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
SA385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
SA387/A387M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
SA388/A388M-03 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
SA389/A389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
SA390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
SA391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain
SA392-03 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
SA394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
SA395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
SA400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
SA401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
SA403/A403M-03a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
SA407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
SA409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
SA411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
SA413/A413M-01 Standard Specification for Carbon Steel Chain
SA414/A414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
SA416/A416M-02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
SA417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
SA418-99(2003) Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
SA420/A420M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
SA421/A421M-02 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
SA423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
SA424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling
SA426/A426M-02 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
SA427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
SA428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
SA434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
SA435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
SA436-84(2001) Standard Specification for Austenitic Gray Iron Castings
SA437/A437M-01a Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
SA439-83(1999) Standard Specification for Austenitic Ductile Iron Castings
SA447/A447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
SA449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
SA450/A450M-03 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
SA451/A451M-02 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
SA453/A453M-03 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
SA455/A455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
SA456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
SA459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
SA460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand
SA463/A463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
SA466/A466M-01 Standard Specification for Weldless Chain
SA467/A467M-01 Standard Specification for Machine and Coil Chain
SA469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
SA470-03 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
SA471-02 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
SA472-98(2003) Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
SA473-01 Standard Specification for Stainless Steel Forgings
SA474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
SA475-98 Standard Specification for Zinc-Coated Steel Wire Strand
SA476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
SA478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
SA479/A479M-03 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
SA480/A480M-03c Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA481-94(2000) Standard Specification for Chromium Metal
SA482-93(2000) Standard Specification for Ferrochrome-Silicon
SA483-64(2000) Standard Specification for Silicomanganese
SA484/A484M-03a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
SA485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
SA487/A487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service
SA488/A488M-01e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
SA489-03 Standard Specification for Carbon Steel Lifting Eyes
SA490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
SA490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
SA491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
SA492-95(2000) Standard Specification for Stainless Steel Rope Wire
SA493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
SA494/A494M-03a Standard Specification for Castings, Nickel and Nickel Alloy
SA495-94(2000) Standard Specification for Calcium-Silicon Alloys
SA496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
SA497/A497M-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
SA498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins
SA499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
SA500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
SA501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
SA502-03 Standard Specification for Rivets, Steel, Structural
SA503/A503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts
SA504-93(1999) Standard Specification for Wrought Carbon Steel Wheels
SA505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
SA506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
SA507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
SA508/A508M-03a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
SA510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
SA510M-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
SA511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing
SA512-96(2001) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
SA513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
SA514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
SA515/A515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
SA516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
SA517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
SA518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
SA519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
SA521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
SA522/A522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
SA523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
SA524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
SA529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
SA530/A530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
SA531/A531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
SA532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
SA533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
SA534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings
SA536-84(1999)e1 Standard Specification for Ductile Iron Castings
SA537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
SA539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
SA540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
SA541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
SA542/A542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
SA543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
SA550-78(2000) Standard Specification for Ferrocolumbium
SA551-94(1999) Standard Specification for Steel Tires
SA553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
SA554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
SA555/A555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
SA556/A556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
SA560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy
SA561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
SA562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
SA563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
SA563-00 Standard Specification for Carbon and Alloy Steel Nuts
SA564/A564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
SA565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
SA568/A568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
SA571/A571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
SA572/A572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
SA573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness
SA574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
SA574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
SA575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
SA576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
SA577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
SA578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
SA579-01 Standard Specification for Superstrength Alloy Steel Forgings
SA580/A580M-98 Standard Specification for Stainless Steel Wire
SA581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
SA582/A582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars
SA586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
SA587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
SA588/A588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
SA589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
SA591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
SA592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
SA595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
SA596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
SA597-87(1999) Standard Specification for Cast Tool Steel
SA598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
SA599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
SA600-92a(1999) Standard Specification for Tool Steel High Speed
SA601-96(2000) Standard Specification for Electrolytic Manganese Metal
SA602-94(1998) Standard Specification for Automotive Malleable Iron Castings
SA603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
SA604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
SA606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
SA608/A608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
SA609/A609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
SA610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
SA612/A612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
SA615/A615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
SA618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
SA623-03 Standard Specification for Tin Mill Products, General Requirements
SA623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric]
SA624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
SA625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
SA626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
SA627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
SA629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
SA630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
SA632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
SA633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
SA635/A635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for
SA636-76(2000) Standard Specification for Nickel Oxide Sinter
SA638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
SA640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
SA641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
SA644-98(2003) Standard Terminology Relating to Iron Castings
SA645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
SA646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
SA648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
SA649/A649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
SA650/A650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
SA653/A653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
SA656/A656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
SA657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
SA659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
SA660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
SA662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
SA663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
SA664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
SA666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
SA667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
SA668/A668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
SA671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
SA672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
SA673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
SA674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
SA675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
SA677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
SA678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
SA679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
SA681-94(1999) Standard Specification for Tool Steels Alloy
SA682/A682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
SA683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
SA684/A684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
SA686-92(1999) Standard Specification for Tool Steel, Carbon
SA688/A688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
SA689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs
SA690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
SA691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
SA693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA694/A694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
SA696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
SA697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
SA698/A698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
SA700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
SA701-96(2000) Standard Specification for Ferromanganese-Silicon
SA702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
SA703/A703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
SA704/A704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
SA705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings
SA706/A706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
SA707/A707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
SA709/A709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
