ASTM Standard Spec

ASTM Standard Spec Exporter

Contact Us For High Quality ASTM Standard Spec

At Kobelco Steel & Alloys we pride ourselves on always putting the customer first. We help make stainless solutions simple for you by ensuring satisfaction through high delivery performance, flexibility and extensive service.

We are pleased to introduce ourselves as one of the leading Importsers, Exporters, Suppliers & Stockists of ASTM Standard Spec.

We would appreciate to get your esteemed enquires and look forward to the pleasure receiving your valuable response.

ASTM STANDARD SPECIFICATION

A1-00 Standard Specification for Carbon Steel Tee Rails 
A2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types 
A3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) 
A6/A6M-03c Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling 
A20/A20M-02 Standard Specification for General Requirements for Steel Plates for Pressure Vessels 
A27/A27M-03 Standard Specification for Steel Castings, Carbon, for General Application 
A29/A29M-03 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for 
A31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels 
A34/A34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials 
A36/A36M-03a Standard Specification for Carbon Structural Steel 
A47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings 
A48/A48M-03 Standard Specification for Gray Iron Castings 
A49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars 
A53/A53M-02 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless 
A65-01 Standard Specification for Steel Track Spikes 
A66-01 Standard Specification for Steel Screw Spikes 
A67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked 
A74-03b Standard Specification for Cast Iron Soil Pipe and Fittings 
A82-02 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement 
A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings 
A99-03 Standard Specification for Ferromanganese 
A100-93(2000) Standard Specification for Ferrosilicon 
A101-93(2000) Standard Specification for Ferrochromium 
A102-93(2000) Standard Specification for Ferrovanadium 
A105/A105M-03 Standard Specification for Carbon Steel Forgings for Piping Applications 
A106-02a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service 
A108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished 
A109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled 
A111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire 
A116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric 
A121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire 
A123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products 
A125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated 
A126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings 
A128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese 
A131/A131M-01 Standard Specification for Structural Steel for Ships 
A132-89(2000) Standard Specification for Ferromolybdenum 
A134-96(2001) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) 
A135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe 
A139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) 
A143/A143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement 
A144-02 Specification for Ferrotungsten 
A146-64(2000) Standard Specification for Molybdenum Oxide Products 
A148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes 
A153/A153M-03 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware 
A159-83(2001) Standard Specification for Automotive Gray Iron Castings 
A167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip 
A176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip 
A178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes 
A179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes 
A181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping 
A182/A182M-02 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service 
A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts 
A184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement 
A185-02 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete 
A192/A192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service 
A193/A193M-03 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 
A194/A194M-03b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both 
A197/A197M-00 Standard Specification for Cupola Malleable Iron 
A202/A202M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon 
A203/A203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel 
A204/A204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum 
A209/A209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes 
A210/A210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes 
A213/A213M-03b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 
A214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes 
A216/A216M-93(2003) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service 
A217/A217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service 
A220/A220M-99 Standard Specification for Pearlitic Malleable Iron 
A225/A225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel 
A227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs 
A228/A228M-02 Standard Specification for Steel Wire, Music Spring Quality 
A229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs 
A230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality 
A231/A231M-96(2002) Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire 
A232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire 
A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service 
A239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles 
A240/A240M-03c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 
A242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel 
A247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings 
A249/A249M-03a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes 
A250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes 
A252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles 
A254-97(2002) Standard Specification for Copper-Brazed Steel Tubing 
A255-02 Standard Test Method for Determining Hardenability of Steel 
A262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels 
A263-03 Standard Specification for Stainless Chromium Steel-Clad Plate 
A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate 
A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate 
A266/A266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components 
A268/A268M-03 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 
A269-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 
A270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 
A275/A275M-98(2003) Standard Test Method for Magnetic Particle Examination of Steel Forgings 
A276-03 Standard Specification for Stainless Steel Bars and Shapes 
A278/A278M-01 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) 
A283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates 
A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength 
A288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators 
A289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators 
A290-02 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears 
A291-03 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears 
A295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel 
A297/A297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application 
A299/A299M-03e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon 
A302/A302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel 
A304-02 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 
A307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength 
A308/A308M-03 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process 
A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test 
A311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements 
A312/A312M-03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes 
A313/A313M-03 Standard Specification for Stainless Steel Spring Wire 
A314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging 
A319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts 
A320/A320M-03 Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service 
A321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered 
A322-91(2001) Standard Specification for Steel Bars, Alloy, Standard Grades 
A323-93(2000) Standard Specification for Ferroboron 
A324-73(2000) Standard Specification for Ferrotitanium 
A325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength 
A325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric] 
A327-91(1997) Standard Test Methods for Impact Testing of Cast Irons 
A327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric) 
A328/A328M-03 Standard Specification for Steel Sheet Piling 
A331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished 
A333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service 
A334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service 
A335/A335M-03 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service 
A336/A336M-03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts 
A338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) 
A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing 
A341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods 
A342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials 
A343/A343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame 
A345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications 
A348/A348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm

Epstein Frame 
A350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components 
A351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts 
A352/A352M-03 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service 
A353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered 
A354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners 
A355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding 
A356/A356M-98(2003) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines 
A358/A358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service 
A363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand 
A367-60(1999) Standard Test Methods of Chill Testing of Cast Iron 
A368-95a(2000) Standard Specification for Stainless Steel Wire Strand 
A369/A369M-02 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service 
A370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products 
A372/A372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels 
A376/A376M-02a Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service 
A377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe 
A380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems 
A381-96(2001) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems 
A384/A384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies 
A385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) 
A387/A387M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum 
A388/A388M-03 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings 
A389/A389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) 
A391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain 
A392-03 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric 
A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 
A395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures 
A400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties 
A401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy 
A403/A403M-03a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings 
A407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs 
A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service 
A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire 
A413/A413M-01 Standard Specification for Carbon Steel Chain 
A414/A414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels 
A416/A416M-02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete 
A417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units 
A418-99(2003) Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings 
A420/A420M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 
A421/A421M-02 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete 
A423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes 
A424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling 
A426/A426M-02 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service 
A427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction 
A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles 
A434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered 
A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates 
A436-84(2001) Standard Specification for Austenitic Gray Iron Castings 
A437/A437M-01a Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service 
A439-83(1999) Standard Specification for Austenitic Ductile Iron Castings 
A447/A447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service 
A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs 
A450/A450M-03 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes 
A451/A451M-02 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service 
A453/A453M-03 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels 
A455/A455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese 
A456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings 
A459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape 
A460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand 
A463/A463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process 
A466/A466M-01 Standard Specification for Weldless Chain 
A467/A467M-01 Standard Specification for Machine and Coil Chain 
A469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors 
A470-03 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts 
A471-02 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels 
A472-98(2003) Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings 
A473-01 Standard Specification for Stainless Steel Forgings 
A474-98 Standard Specification for Aluminum-Coated Steel Wire Strand 
A475-98 Standard Specification for Zinc-Coated Steel Wire Strand 
A476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls 
A478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire 
A479/A479M-03 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels 
A480/A480M-03c Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 
A481-94(2000) Standard Specification for Chromium Metal 
A482-93(2000) Standard Specification for Ferrochrome-Silicon 
A483-64(2000) Standard Specification for Silicomanganese 
A484/A484M-03a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings 
A485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service 
A488/A488M-01e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel 
A489-03 Standard Specification for Carbon Steel Lifting Eyes 
A490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] 
A490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength 
A491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric 
A492-95(2000) Standard Specification for Stainless Steel Rope Wire 
A493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging 
A494/A494M-03a Standard Specification for Castings, Nickel and Nickel Alloy 
A495-94(2000) Standard Specification for Calcium-Silicon Alloys 
A496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement 
A497/A497M-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete 
A498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins 
A499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails 
A500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 
A501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing 
A502-03 Standard Specification for Rivets, Steel, Structural 
A503/A503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts 
A504-93(1999) Standard Specification for Wrought Carbon Steel Wheels 
A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for 
A506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled 
A507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled 
A508/A508M-03a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels 
A510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel 
A510M-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] 
A511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing 
A512-96(2001) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing 
A513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing 
A514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding 
A515/A515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service 
A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service 
A517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered 
A518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings 
A519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing 
A521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use 
A522/A522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service 
A523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits 
A524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures 
A529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality 
A530/A530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe 
A531/A531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings 
A532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons 
A533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel 
A534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings 
A536-84(1999)e1 Standard Specification for Ductile Iron Castings 
A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel 
A539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines 
A540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications 
A541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components 
A542/A542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium 
A543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum 
A550-78(2000) Standard Specification for Ferrocolumbium 
A551-94(1999) Standard Specification for Steel Tires 
A553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel 
A554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing 
A555/A555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods 
A556/A556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes 
A560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy 
A561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars 
A562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings 
A563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric] 
A563-00 Standard Specification for Carbon and Alloy Steel Nuts 
A564/A564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes 
A565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service 
A568/A568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for 
A571/A571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service 
A572/A572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel 
A573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness 
A574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws 
A574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] 
A575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades 
A576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality 
A577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates 
A578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications 
A579-01 Standard Specification for Superstrength Alloy Steel Forgings 
A580/A580M-98 Standard Specification for Stainless Steel Wire 
A581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods 
A582/A582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars 
A586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand 
A587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry 
A588/A588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick 
A589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe 
A591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications 
A592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels 
A595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use 
A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens 
A597-87(1999) Standard Specification for Cast Tool Steel 
A598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores 
A599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet 
A600-92a(1999) Standard Specification for Tool Steel High Speed 
A601-96(2000) Standard Specification for Electrolytic Manganese Metal 
A602-94(1998) Standard Specification for Automotive Malleable Iron Castings 
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope 
A604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets 
A606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance 
A608/A608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures 
A609/A609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof 
A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size 
A612/A612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service 
A615/A615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement 
A618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing 
A623-03 Standard Specification for Tin Mill Products, General Requirements 
A623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric] 
A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced 
A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced 
A626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced 
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities 
A629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications 
A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate 
A632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service 
A633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates 
A635/A635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for 
A636-76(2000) Standard Specification for Nickel Oxide Sinter 
A638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service 
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable 
A641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire 
A644-98(2003) Standard Terminology Relating to Iron Castings 
A645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated 
A646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings 
A648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe 
A649/A649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery 
A650/A650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced 
A653/A653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 
A656/A656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability 
A657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced 
A659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled 
A660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service 
A662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service 
A663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties 
A664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications 
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar 
A667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders 
A668/A668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use 
A671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures 
A672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures 
A673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel 
A674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids 
A675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties 
A677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types 
A678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates 
A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn 
A681-94(1999) Standard Specification for Tool Steels Alloy 
A682/A682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For 
A683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types 
A684/A684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled 
A686-92(1999) Standard Specification for Tool Steel, Carbon 
A688/A688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes 
A689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs 
A690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments 
A691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures 
A693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 
A694/A694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components 
A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods 
A698/A698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields 
A700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment 
A701-96(2000) Standard Specification for Ferromanganese-Silicon 
A702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought 
A703/A703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts 
A704/A704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement 
A705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings 
A706/A706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement 
A707/A707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service 
A709/A709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges 
A710/A710M-02 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates 
A711-03 Standard Specification for Steel Forging Stock 
A712-97(2002) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys 
A713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components 
A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe 
A716-03 Standard Specification for Ductile Iron Culvert Pipe 
A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens 
A719/A719M-02 Standard Test Method for Lamination Factor of Magnetic Materials 
A720/A720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel 
A721/A721M-02 Standard Test Method for Ductility of Oriented Electrical Steel 
A722/A722M-98(2003) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete 
A723/A723M-02 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application 
A724/A724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types 
A727/A727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness 
A729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service 
A730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use 
A732/A732M-02 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures 
A733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples 
A734/A734M-87a(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered 
A735/A735M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel 
A737/A737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel 
A738/A738M-03a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service 
A739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both 
A740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) 
A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail 
A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe 
A743/A743M-03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application 
A744/A744M-00e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service 
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings 
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe 
A747/A747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening 
A748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use 
A749/A749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for 
A750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas 
A751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products 
A752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel 
A752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] 
A753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) 
A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence 
A755/A755M-01 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products 
A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel 
A757/A757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness 
A759-00 Standard Specification for Carbon Steel Crane Rails 
A760/A760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains 
A761/A761M-03 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches 
A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains 
A763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels 
A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs 
A765/A765M-01 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements 
A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement 
A768-95(2001) Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts 
A769/A769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes 
A770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications 
A771/A771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components 
A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current 
A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs 
A774/A774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars 
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products 
A779/A779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete 
A780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings 
A781/A781M-03a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use 
A782/A782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel 
A786/A786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates 
A787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing 
A788-03a Standard Specification for Steel Forgings, General Requirements 
A789/A789M-02a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 
A790/A790M-03 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe 
A792/A792M-03 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process 
A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel 
A794-97(2002) Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled 
A795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use 
A796/A796M-03 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications 
A799/A799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content 
A800/A800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof 
A801/A801M-99 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650 
A802/A802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination 
A803/A803M-03 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes 
A804/A804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens 
A805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled 
A807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications 
A808/A808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness 
A809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire 
A810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh 
A811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques 
A813/A813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe 
A814/A814M-03 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe 
A815/A815M-01a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings 
A817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire 
A818-91(2001) Standard Specification for Coppered Carbon Steel Wire 
A820-01 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete 
A821/A821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks 
A822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service 
A823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings 
A824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence 
A826/A826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components 
A827/A827M-02 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications 
A829/A829M-00 Standard Specification for Alloy Structural Steel Plates 
A830/A830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements 
A831/A831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
A832/A832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium 
A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers 
A834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use 
A835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives 
A836/A836M-02 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service 
A837/A837M-03 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications 
A838-02 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications 
A839-02 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications 
A840/A840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel 
A841/A841M-03a Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) 
A842-85(1997) Standard Specification for Compacted Graphite Iron Castings 
A844/A844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process 
A845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel 
A846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel 
A847-99a(2003) Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01 Standard Specification for Low-Carbon Magnetic Iron 
A849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe 
A852/A852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick 
A853-93(2003) Standard Specification for Steel Wire, Carbon, for General Use 
A854/A854M-98(2003) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire 
A855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand 
A856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire 
A857/A857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage 
A858/A858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service 
A859/A859M-02 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components 
A860/A860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings 
A861-02 Standard Specification for High-Silicon Iron Pipe and Fittings 
A862/A862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe 
A865-03 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 
A866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel 
A867-03 Standard Specification for Iron-Silicon Relay Steels 
A871/A871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance 
A872/A872M-02 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments 
A874/A874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service 
A875/A875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process 
A876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types 
A877/A877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality 
A878/A878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality 
A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface 
A880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys 
A881/A881M-02 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties 
A882/A882M-02a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand 
A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials 
A884/A884M-02 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement 
A885/A885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe 
A886/A886M-02 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete 
A887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application 
A888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications 
A889/A889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame 
A890/A890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application 
A891-98(2003) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels 
A892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels 
A893/A893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies 
A894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials 
A895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip 
A896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures 
A897/A897M-03 Standard Specification for Austempered Ductile Iron Castings 
A898/A898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes 
A899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated 
A900/A900M-01 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip 
A901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types 
A902-03 Standard Terminology Relating to Metallic Coated Steel Products 
A903/A903M-99(2003) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection 
A904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys 
A905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting 
A908-03 Standard Specification for Stainless Steel Needle Tubing 
A909-03 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use 
A910/A910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete 
A911/A911M-02 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties 
A912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens 
A913/A913M-03 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) 
A914/A914M-92(1999)e1 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements 
A915/A915M-93(2003) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades 
A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) 
A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface 
A920/A920M-02a Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties 
A921/A921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging 
A922-93(2000) Standard Specification for Silicon Metal 
A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels 
A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process 
A925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand 
A926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe 
A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method 
A928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal 
A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe 
A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits 
A931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand 
A932/A932M-01 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens 
A933/A933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement 
A934/A934M-03 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars 
A937/A937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces 
A938-97(2003) Standard Test Method for Torsion Testing of Wire 
A939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings 
A940-96(2001) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors 
A941-03 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys 
A942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells 
A943/A943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes 
A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens 
A945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness 
A946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service 
A947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric] 
A949/A949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe 
A950/A950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling 
A951-02 Standard Specification for Masonry Joint Reinforcement 
A952/A952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links 
A953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing 
A954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe 
A955/A955M-03b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement 
A956-02 Standard Test Method for Leeb Hardness Testing of Steel Products 
A957-03 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use 
A958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades 
A959-03 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels 
A960-03 Standard Specification for Common Requirements for Wrought Steel Piping Fittings 
A961-02 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications 
A962/A962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range 
A964/A964M-02 Standard Specification for Corrugated Steel Box Culverts 
A965/A965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts 
A966/A966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current 
A967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts 
A968/A968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service 
A970/A970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement 
A971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils 
A972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles 
A973/A973M-01 Standard Specification for Grade 100 Alloy Steel Chain 
A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) 
A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) 
A976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application 
A977/A977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs 
A978/A978M-97(2002)e1 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications 
A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field 
A980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled 
A981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors 
A982-02 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils 
A983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines 
A984/A984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded 
A985/A985M-03 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts 
A986/A986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings 
A987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products 
A988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service 
A989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service 
A990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service 
A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products 
A992/A992M-03 Standard Specification for Structural Steel Shapes 
A993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature 
A994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys 
A995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts 
A996/A996M-03b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement 
A997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination 
A998/A998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications 
A999/A999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe 
A1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality 
A1001-01 Standard Specification for High Strength Steel Castings in Heavy Sections 
A1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy 
A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members 
A1004/A1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members