+91 22 66394647 , 66158097

kobelcosteel1@gmail.com

Stockist, Importers & Exporters Of High Nickel Based Alloys, Alloy C276, Alloy 400, Alloy K500, Titanium, Duplex, & Super Duplex. Special Stockist of Alloy 600 / 625 Seamless Pipes of all sizes with mill test certificate - Origin Europe Mill

Home/SA516-60/70 HIC Tested Plate

SA516-60/70 HIC Tested Plate

SA516-60/70 HIC Tested Plate Exporter

Contact Us For High Quality SA516-60/70 HIC Tested Plate

At Kobelco Steel & Alloys we pride ourselves on always putting the customer first. We help make stainless solutions simple for you by ensuring satisfaction through high delivery performance, flexibility and extensive service.

We are pleased to introduce ourselves as one of the leading Importers, Exporters, Suppliers & Stockists of SA516-60/70 HIC Tested Plate.

We would appreciate to get your esteemed enquires and look forward to the pleasure receiving your valuable response.

SA516-60/70 HIC Tested Plate

ASTM A516/516M / ASME SA516/516M GRADE 60/65/70 HIC (Hydrogen Induced Cracking) Tested, SSCC (Sulphide Stress Corrosion Cracking) Tested, SOHIC (Stress Oriented Hydrogen Induced Cracking) Tested FINE GRAINED PRESSURE VESSEL STEEL PLATES FOR SOUR GAS SERVICE

Hot Rolled Steel ASTM/ASME A/SA 516 Grade 60/70 HIC Tested Plates in accordance with NACE Test Method TM 0284 Latest Edition using a test solution A pH of 3 conforming to NACE TM 0177 Latest Edition
CLR : Crack Length Ratio <5% / <10% / <15%
CTR : Crack Thickness Ratio <1.5% / <3% / <1%
CSR : Crack Sensitivity Ratio <0.5% / <1% / <2%
Test Solution B with pH of 5
CLR : Crack Length Ratio <0.5%
CTR : Crack Thickness Ratio <0.1%
CSR : Crack Sensitivity Ratio <0.05%
ASME SA516/SA516M-07 MT LTV ZT Grade 60/65/70
ASTM A516/A516M-07 MT LTV ZT Grade 60/65/70
ASME Section II Part A Edition 2007 Addenda 2008 
ASME SA20/SA20M-08
ASTM A20/A20M-08
ASME SA770/SA770M-04 
ASTM E290-97a
NACE MR-0175 / ISO 15156
Low Sulphur 0.003% max. with Supplementary Requirements S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12, S14, S17 acc. to ASME SA20/SA20M
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment 
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated/Degassed, Fully Deoxidised to fine grain practice & Calcium Treated if Sulphur content is >0.001%, Desulphurised, Dephosphorised
Charpy V-notch Impact Tested 
Size tolerance as per EN 10029:1991 
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A 
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991 
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge 
Ultrasonic as per ASTM A578/578M Level A / Level B 
Grain size No.6-8 or finer acc. to ASTM E112-96 
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 with IBR Form IV 

We mainly stock the Plates of following make : Salzgitter Mannesmann - Germany 
ThyssenKrupp Steel - Germany 
ThyssenKrupp Stahl - Germany 
Dillinger Hutte - Germany 
Rautaruukki - Finland 
Voestalphine Grobblech - Austria
ISD HUTA - Poland 
Corus - U.K 
InduSteel - France 
InduSteel - Belgium 
SSAB - Sweden
Sumitomo Metals - Japan
Kobe Steel - Japan 
JFE Steel - Japan 
Japan Steel - Japan 
Nippon Steel - Japan 

Our Products